Guy Harvey Embroidered Men's Belts


 

Email us with your questions or call 888 871-0110
Leather Belts
Brass Buckle, with Full Length Leather Backed by Cotton Webbing. Artworkk is Embroidered on Leather Over Entire Length of Belt

Before you order your belts, please check the sizing guide below

 

 
How to Measure for a Belt Size:
1. Using an existing belt, correct measurement begins from the place where the buckle connects to the belt and then to the middle of the holes The rest of the belt is not considered for measurement purposes.
2. Measure your old belt: Lay your old belt flat on a table. Then measure from the buckle bar (do not measure the buckle) to the other end of the belt to whichever hole is most comfortable when the belt is worn.
3. Tape Measure: Wrap a tape measure around your waist at the level you wish to wear your belt and pull snugly.
4. Men's Belts: To Ensure a Perfect Fit, Add Two Inch To Your Pant Size, This Way Your Belt Will Fit Most Comfortably near The Center Hole.
5.Please DO NOT measure the length from end to end. You will not get the accurate size that way.

Leather & Ribbon Belts
Brass Buckle, with Leather & Cotton Webbing. Artwork is Embroidered on Ribbon Over Entire Length of Belt

 
 
 
How to Measure for a Belt Size
 
Disregard any size information on your existing belt. Chances are good that it has stretched since manufacture.
 
(Using an existing, well-fitting belt) Lay your old belt flat on a table. Then measure from the buckle bar, i.e. where the belt attaches to the buckle, (do not include the length of the buckle) to the other end of the belt to whichever hole is most comfortable when the belt is worn. Round up to the next even number, eg round 31 inches to size 32. This is the size of the Guy Harvey belt to order.
 
Return to top